LMPPOS Barcode Scanner FAQ

Q: Why doesn’t the scanner have a laser?

A:1.The reader without electricity, please check power supplier.

2. The data cable is not available, please use the original factory-equipped data cable.

3. Interface of the cable is loose, please reconnect.


Q: The scanner can read codes normally, but why does its output have random code or Chinese?

A:1.Some input methods except English are opened, they will capture data from the scanner. Please ensure these input methods are closed.

2. The interface of the data cable is in a poor connection. Please replugged the data cable and note that PC and POS should be restarted to continue using if you use the scanner with keyboard data cable.

3. Please confirm the isotropic parameters are correct such as baud rate, data bits, etc if you RS232 interface.

4. Something is wrong with the data cable, please replace it.


Q: Why can't a code be read?

A:1.The code may miss data, please scan a similar code to test.

2. The distance between scanner and code is improper, please take the code closer or far

3. The code is poorly printed. Preferably reading distance is about 5-10 cm.


Q: How to do with the situation when codes are unreadable?

A:1.Close power and connect the scanner correctly, then open power again and test it.

2. If the problem cannot be solved, please contact the dealer or manufacturer


Comments

Popular Posts